Fix Xerox Error 005-300: Network Connection Error

warning Severity: warning

If your Xerox printer is displaying error 005-300, do not worry – this is a known issue with a proven fix. This error typically indicates network connection error that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Xerox Error 005-300?

This error can be triggered by one or more of the following issues:

Ethernet cable disconnected or faulty
Network configuration incorrect
DHCP server not responding
IP address conflict on the network

How to Fix Xerox Error 005-300

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

Step 1: Check the Ethernet cable connection at both ends
Step 2: Verify the network port link light is active
Step 3: Try a different Ethernet cable
Step 4: Check the IP configuration through the printer’s control panel
Step 5: If using DHCP, verify the DHCP server is operating
Step 6: Try assigning a static IP address
Step 7: Access CentreWare to review all network settings

Affected Xerox Printer Models

The following Xerox printer models are known to display error 005-300:

Related Xerox Error Codes

If you are troubleshooting error 005-300, these related error codes may also be relevant:

Frequently Asked Questions

What is Xerox error 005-300?

Error 005-300 indicates the printer has lost its network connection or cannot establish one. Check physical connections and network configuration.

How do I access Xerox CentreWare?

Type the printer’s IP address in a web browser. If you do not know the IP, print a configuration page from the printer’s control panel. CentreWare provides full network and device management.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.

Xerox Error 005-300 Fix – Network Connection Error | TroubleshootMyPrinter