Fix Lexmark Error 88.xx: Replace Cartridge to Continue
critical Severity: critical
If your Lexmark printer is displaying error 88.xx, do not worry – this is a known issue with a proven fix. This error typically indicates replace cartridge to continue that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Lexmark Error 88.xx?
This error can be triggered by one or more of the following issues:
- Toner cartridge is empty and printing has stopped
- Cartridge counter has reached zero
- Return Program cartridge has been depleted
How to Fix Lexmark Error 88.xx
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Replace the empty toner cartridge immediately
- Step 2: Remove the old cartridge and install a new one
- Step 3: Shake the new cartridge before installation
- Step 4: Remove all seals and protective tape
- Step 5: The printer resumes after cartridge replacement
Affected Lexmark Printer Models
The following Lexmark printer models are known to display error 88.xx:
Related Lexmark Error Codes
If you are troubleshooting error 88.xx, these related error codes may also be relevant:
- 31.80 – Missing or Defective Cartridge
- 200.xx – Paper Jam
- 900.xx – Service Error
- 920.xx – Fuser Error
- 31.40 – Imaging Unit Defective
Frequently Asked Questions
What is Lexmark error 88.xx?
Error 88.xx means the toner cartridge is empty and the printer has stopped printing. Unlike the 32.xx warning, this error halts the printer until the cartridge is replaced.
Can I override the 88.xx error?
On most Lexmark models, this error cannot be overridden. The cartridge must be replaced to continue printing.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.