Fix Lexmark Error 35: Insufficient Memory for Collation
info Severity: info
If your Lexmark printer is displaying error 35, do not worry – this is a known issue with a proven fix. This error typically indicates insufficient memory for collation that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Lexmark Error 35?
This error can be triggered by one or more of the following issues:
- Not enough memory to collate the print job
- Large multi-copy job exceeding RAM
- Too many pages to hold in memory for sorting
How to Fix Lexmark Error 35
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Press OK to print what is available in memory
- Step 2: Reduce the number of copies per batch
- Step 3: Print without collation if possible
- Step 4: Increase printer memory if expansion is available
- Step 5: Simplify the document before printing
Affected Lexmark Printer Models
The following Lexmark printer models are known to display error 35:
Related Lexmark Error Codes
If you are troubleshooting error 35, these related error codes may also be relevant:
- 31.80 – Missing or Defective Cartridge
- 200.xx – Paper Jam
- 900.xx – Service Error
- 920.xx – Fuser Error
- 31.40 – Imaging Unit Defective
Frequently Asked Questions
What is Lexmark error 35?
Error 35 means the printer does not have enough memory to sort (collate) all copies of the print job. It can print uncollated copies instead.
How do I print without collation?
In the print dialog, under the Finishing or Layout tab, set Collation to Off or Uncollated. The printer will print all copies of page 1, then all copies of page 2, etc.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.