Fix HP Error 0x61011bed: Ink Cartridge Problem
warning Severity: warning
If your HP printer is displaying error 0x61011bed, do not worry – this is a known issue with a proven fix. This error typically indicates ink cartridge problem that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes HP Error 0x61011bed?
This error can be triggered by one or more of the following issues:
- Ink cartridge not recognized by the printer
- Dirty or damaged cartridge chip contacts
- Third-party cartridge blocked by firmware
- Cartridge installed in the wrong slot
How to Fix HP Error 0x61011bed
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Remove the indicated cartridge and reinsert it firmly
- Step 2: Clean the cartridge chip with a dry lint-free cloth
- Step 3: Verify the cartridge is in the correct color-coded slot
- Step 4: Try a different cartridge to rule out a defective unit
- Step 5: Check if a recent firmware update is blocking third-party cartridges
- Step 6: Power cycle the printer after reseating cartridges
Affected HP Printer Models
The following HP printer models are known to display error 0x61011bed:
Related HP Error Codes
If you are troubleshooting error 0x61011bed, these related error codes may also be relevant:
- 49.4C02 – Critical Firmware Error
- 50.2 – Fuser Warm-Up Error
- 13.A3 – Paper Jam in Tray 2/3 Area
- 79 – Service Error – Critical
- 59.F0 – Motor Error
Frequently Asked Questions
What causes HP error 0x61011bed?
This error means one or more ink cartridges are not being recognized. Common causes include dirty contacts, incorrect slot placement, or firmware blocking non-HP cartridges.
How do I fix cartridge not recognized errors on HP printers?
Remove the cartridge, clean the gold contacts with a lint-free cloth, and reinsert. Ensure it is in the correct slot. If using third-party cartridges, check if a firmware update has added new restrictions.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.