Fix Canon Error E001: Fixing Assembly Temperature Error

critical Severity: critical

If your Canon printer is displaying error E001, do not worry – this is a known issue with a proven fix. This error typically indicates fixing assembly temperature error that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Canon Error E001?

This error can be triggered by one or more of the following issues:

Fuser overheating beyond safe temperature
Thermistor failure in the fuser
Fuser control circuit malfunction

How to Fix Canon Error E001

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

Step 1: Turn off the printer immediately
Step 2: Allow to cool for at least 30 minutes
Step 3: Ensure adequate ventilation around the printer
Step 4: Power on and check if the error clears
Step 5: If persistent, the fuser needs replacement

Affected Canon Printer Models

The following Canon printer models are known to display error E001:

Related Canon Error Codes

If you are troubleshooting error E001, these related error codes may also be relevant:

Frequently Asked Questions

What is Canon error E001?

Error E001 indicates the fuser temperature has exceeded safe operating limits. This is a thermal safety error that halts the printer to prevent damage.

Is E001 different from E000?

E000 is a general fuser malfunction, while E001 specifically indicates an overtemperature condition. Both typically require fuser replacement if they persist.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.

Canon Error E001 Fix – Fixing Assembly Temperature Error | TroubleshootMyPrinter