Fix Canon Error E000: Fixing Assembly Error

critical Severity: critical

If your Canon printer is displaying error E000, do not worry – this is a known issue with a proven fix. This error typically indicates fixing assembly error that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Canon Error E000?

This error can be triggered by one or more of the following issues:

Fuser unit malfunction or failure
Fuser temperature sensor error
Power supply issue to the fuser
Fuser reaching end of rated life

How to Fix Canon Error E000

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

Step 1: Turn off the printer and unplug for 10 minutes
Step 2: Plug back in and power on — the error may clear after a cool-down
Step 3: If the error persists, check if the fuser unit is nearing its rated page life
Step 4: Replace the fuser unit if it has exceeded its specifications
Step 5: Contact Canon service if the printer is under warranty

Affected Canon Printer Models

The following Canon printer models are known to display error E000:

Related Canon Error Codes

If you are troubleshooting error E000, these related error codes may also be relevant:

Frequently Asked Questions

What does Canon error E000 mean?

Error E000 on Canon imageCLASS printers indicates a fixing (fuser) assembly malfunction. The fuser is not heating properly or has detected a temperature abnormality.

How do I replace the fuser on a Canon imageCLASS?

Open the rear cover, release the fuser lock levers, and slide the fuser out. Install the new fuser and lock it in place. The fuser is a user-replaceable part available from Canon or authorized dealers.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.

Canon Error E000 Fix – Fixing Assembly Error | TroubleshootMyPrinter