Fix Canon Error E003: Fixing Film Error

critical Severity: critical

If your Canon printer is displaying error E003, do not worry – this is a known issue with a proven fix. This error typically indicates fixing film error that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Canon Error E003?

This error can be triggered by one or more of the following issues:

Fixing film inside the fuser has torn or degraded
Paper jam damaged the fixing film
Fuser has exceeded its rated page count
Incompatible paper damaged the fuser film

How to Fix Canon Error E003

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

Step 1: Turn off the printer and check for any jammed paper near the fuser
Step 2: If paper was jammed, remove it carefully without tearing
Step 3: Power cycle the printer
Step 4: If the error persists, the fuser unit needs replacement
Step 5: Use only paper types specified in the printer’s documentation

Affected Canon Printer Models

The following Canon printer models are known to display error E003:

Related Canon Error Codes

If you are troubleshooting error E003, these related error codes may also be relevant:

Frequently Asked Questions

What is Canon error E003?

Error E003 indicates a problem with the fixing film inside the fuser assembly. The film may be torn, wrinkled, or degraded from wear.

Can I repair the fixing film?

No, the fixing film cannot be repaired. The entire fuser unit must be replaced. This is a standard maintenance item that wears out over the life of the printer.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.

Canon Error E003 Fix – Fixing Film Error | TroubleshootMyPrinter