Fix Canon Error 1700: Ink Absorber Almost Full
warning Severity: warning
If your Canon printer is displaying error 1700, do not worry – this is a known issue with a proven fix. This error typically indicates ink absorber almost full that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Canon Error 1700?
This error can be triggered by one or more of the following issues:
- Waste ink absorber approaching maximum capacity
- Frequent print head cleaning cycles accelerating pad saturation
How to Fix Canon Error 1700
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: This is a warning that the waste ink absorber is nearing capacity
- Step 2: Press the Resume/Cancel button to clear the warning and continue printing
- Step 3: Plan to have the printer serviced before the absorber reaches full capacity (error 5B00)
- Step 4: Reduce unnecessary print head cleaning to slow pad saturation
- Step 5: Contact Canon support to schedule waste ink pad replacement
Affected Canon Printer Models
The following Canon printer models are known to display error 1700:
Related Canon Error Codes
If you are troubleshooting error 1700, these related error codes may also be relevant:
- 5100 – Carriage Error
- 6000 – Paper Feed Error
- B200 – Printhead Voltage Error
- 1403 – Printhead Not Installed Correctly
- 5B00 – Waste Ink Absorber Full
Frequently Asked Questions
What is the difference between error 1700 and 5B00?
Error 1700 is a warning that the waste ink absorber is almost full — you can still print by pressing Resume. Error 5B00 means it is completely full, and the printer will not function until the absorber is replaced or the counter is reset.
How many prints until the absorber is full?
This depends on how many cleaning cycles have been performed. Normal printing contributes very little to waste ink. Frequent cleaning cycles fill the absorber much faster. The absorber typically lasts 2-5 years of average home use.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.