Fix Canon Error 1403: Printhead Not Installed Correctly
warning Severity: warning
If your Canon printer is displaying error 1403, do not worry – this is a known issue with a proven fix. This error typically indicates printhead not installed correctly that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Canon Error 1403?
This error can be triggered by one or more of the following issues:
- Printhead not seated properly in the carriage
- Dirty electrical contacts on the printhead
- Printhead is damaged or has failed
- Incompatible printhead installed
How to Fix Canon Error 1403
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Open the printer and lift the printhead lock lever
- Step 2: Remove the printhead assembly
- Step 3: Clean the electrical contacts on both the printhead and the carriage with a lint-free cloth
- Step 4: Reinstall the printhead firmly, pressing down until it clicks
- Step 5: Lower the lock lever to secure the printhead
- Step 6: Close the cover and restart the printer
Affected Canon Printer Models
The following Canon printer models are known to display error 1403:
Related Canon Error Codes
If you are troubleshooting error 1403, these related error codes may also be relevant:
- 5100 – Carriage Error
- 6000 – Paper Feed Error
- B200 – Printhead Voltage Error
- 5B00 – Waste Ink Absorber Full
- 1700 – Ink Absorber Almost Full
Frequently Asked Questions
What does Canon error 1403 mean?
Error 1403 indicates the printer cannot detect or communicate with the printhead. The printhead may be improperly installed, have dirty contacts, or may have failed.
Where can I buy a replacement Canon printhead?
Canon printheads can be purchased from Canon’s online store, authorized Canon dealers, or third-party retailers. Search for your specific printhead model number (e.g., QY6-0082 for PIXMA models). Prices typically range from $30-$80.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.