Fix Kyocera Error F000: Controller Error
critical Severity: critical
If your Kyocera printer is displaying error F000, do not worry – this is a known issue with a proven fix. This error typically indicates controller error that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Kyocera Error F000?
This error can be triggered by one or more of the following issues:
- Main controller board failure
- Memory error
- Firmware corruption
- Power surge damage
How to Fix Kyocera Error F000
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Power cycle the printer
- Step 2: If persistent, try a factory reset from the System Menu
- Step 3: Update firmware if accessible
- Step 4: If the error continues, the controller board needs replacement
- Step 5: Contact Kyocera service
Affected Kyocera Printer Models
The following Kyocera printer models are known to display error F000:
Related Kyocera Error Codes
If you are troubleshooting error F000, these related error codes may also be relevant:
- C6000 – Drum Motor Error
- C6400 – Fuser Motor Error
- C7990 – Waste Toner Full
- CF040 – Color Registration Error
- J0511 – Paper Jam – Tray 1
Frequently Asked Questions
What is Kyocera error F000?
Error F000 indicates a critical failure on the main controller board. The printer’s main processor cannot function properly.
Can F000 be caused by a power surge?
Yes, power surges can damage the controller board. Use a surge protector or UPS with your printer to prevent such damage.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.