Fix Ricoh Error SC670: Main Drive Motor Error
critical Severity: critical
If your Ricoh printer is displaying error SC670, do not worry – this is a known issue with a proven fix. This error typically indicates main drive motor error that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Ricoh Error SC670?
This error can be triggered by one or more of the following issues:
- Main motor stalled due to paper jam
- Main motor failure
- Drive gear damage
- Motor drive circuit board failure
How to Fix Ricoh Error SC670
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Turn off and check for any paper jams blocking the mechanism
- Step 2: Remove any foreign objects from the paper path
- Step 3: Remove and reseat the toner and drum assemblies
- Step 4: Power cycle the printer
- Step 5: If the error persists, the main motor may need replacement
- Step 6: Contact Ricoh service
Affected Ricoh Printer Models
The following Ricoh printer models are known to display error SC670:
Related Ricoh Error Codes
If you are troubleshooting error SC670, these related error codes may also be relevant:
- SC542 – Fuser Heater Error
- SC543 – Fuser Overheat Error
- SC544 – Fuser Temperature Sensor Error
- SC400 – Transfer Belt Error
- SC541 – Fuser Low Temperature
Frequently Asked Questions
What is Ricoh error SC670?
SC670 indicates the main drive motor cannot operate. This could be due to a mechanical obstruction or motor failure.
Is SC670 repairable?
If caused by a paper jam, removing the obstruction resolves it. If the motor has failed, it requires professional replacement.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.