Fix Lexmark Error 41.xx: Paper Size Error
info Severity: info
If your Lexmark printer is displaying error 41.xx, do not worry – this is a known issue with a proven fix. This error typically indicates paper size error that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Lexmark Error 41.xx?
This error can be triggered by one or more of the following issues:
- Paper in tray does not match the job settings
- Paper guides not set correctly
- Wrong tray selected for the print job
How to Fix Lexmark Error 41.xx
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Load the correct paper size in the indicated tray
- Step 2: Adjust paper guides to match the loaded paper
- Step 3: Change the tray paper size setting on the control panel
- Step 4: Update the print job to use the correct paper size
- Step 5: Press OK to use the currently loaded paper
Affected Lexmark Printer Models
The following Lexmark printer models are known to display error 41.xx:
Related Lexmark Error Codes
If you are troubleshooting error 41.xx, these related error codes may also be relevant:
- 31.80 – Missing or Defective Cartridge
- 200.xx – Paper Jam
- 900.xx – Service Error
- 920.xx – Fuser Error
- 31.40 – Imaging Unit Defective
Frequently Asked Questions
What is Lexmark error 41.xx?
Error 41.xx indicates a paper size mismatch between the print job settings and the paper loaded in the tray.
How do I change the tray paper size on a Lexmark printer?
On the control panel, go to Settings > Paper > Tray Configuration and select the tray to change. Set the paper size to match what is loaded.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.