Fix Lexmark Error 54.xx: Network Software Error

warning Severity: warning

If your Lexmark printer is displaying error 54.xx, do not worry – this is a known issue with a proven fix. This error typically indicates network software error that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Lexmark Error 54.xx?

This error can be triggered by one or more of the following issues:

Network communication failure
DHCP configuration error
DNS resolution failure
Network protocol incompatibility

How to Fix Lexmark Error 54.xx

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

Step 1: Check the Ethernet cable connection
Step 2: Print a network setup page to verify current settings
Step 3: Restart the printer to renew network connection
Step 4: Verify DHCP server is operating correctly
Step 5: Try assigning a static IP address
Step 6: Reset network settings to factory defaults if needed

Affected Lexmark Printer Models

The following Lexmark printer models are known to display error 54.xx:

Related Lexmark Error Codes

If you are troubleshooting error 54.xx, these related error codes may also be relevant:

Frequently Asked Questions

What is Lexmark error 54.xx?

Error 54.xx indicates a network software error. The printer cannot properly communicate over the network.

How do I reset Lexmark network settings?

Go to Settings > Network/Ports > Network Setup > Reset to Factory Defaults. This clears all network configuration and requires reconfiguration.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.

Lexmark Error 54.xx Fix – Network Software Error | TroubleshootMyPrinter