Brother Error Jam Rear Fix – Paper Jam at Rear | TroubleshootMyPrinter




Fix Brother Error Jam Rear: Paper Jam at Rear

warning Severity: warning

If your Brother printer is displaying error Jam Rear, do not worry – this is a known issue with a proven fix. This error typically indicates paper jam at rear that can usually be resolved without a service call. Follow the steps below to clear this error.

What Causes Brother Error Jam Rear?

This error can be triggered by one or more of the following issues:

  • Paper jammed in the fuser area
  • Paper wrapping around fuser rollers
  • Heavy paper not clearing the fuser properly
  • Fuser exit rollers worn

How to Fix Brother Error Jam Rear

Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.

  1. Step 1: Open the rear cover of the printer
  2. Step 2: Gently pull any jammed paper downward and out
  3. Step 3: If paper is wrapped around the fuser roller, carefully peel it away
  4. Step 4: Check for torn paper fragments
  5. Step 5: Close the rear cover
  6. Step 6: The error should clear automatically

Affected Brother Printer Models

The following Brother printer models are known to display error Jam Rear:

Related Brother Error Codes

If you are troubleshooting error Jam Rear, these related error codes may also be relevant:

Frequently Asked Questions

What is a Jam Rear error on Brother?

Jam Rear indicates paper is stuck in the rear of the printer, typically in or near the fuser unit. Open the rear cover to access and remove the jammed paper.

Can repeated rear jams damage the fuser?

Yes, repeatedly pulling paper from the fuser area can wear the fuser rollers over time. If rear jams are frequent, check paper compatibility and fuser roller condition.

Error still not resolved?

If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.