Fix Brother Error Toner Low: Toner Cartridge Low
info Severity: info
If your Brother printer is displaying error Toner Low, do not worry – this is a known issue with a proven fix. This error typically indicates toner cartridge low that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Brother Error Toner Low?
This error can be triggered by one or more of the following issues:
- Toner cartridge approaching end of rated yield
- Toner level sensor detecting low toner
- Toner unevenly distributed in the cartridge
How to Fix Brother Error Toner Low
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Remove the toner cartridge and rock it gently side to side to redistribute toner
- Step 2: Reinstall the cartridge
- Step 3: Continue printing — you may get hundreds more pages after the initial warning
- Step 4: Have a replacement TN-series toner cartridge ready
- Step 5: Replace when print quality starts to fade
- Step 6: To continue printing past the warning, set the printer to Continue mode in settings
Affected Brother Printer Models
The following Brother printer models are known to display error Toner Low:
- Brother HL-L2350DW
- Brother MFC-L2710DW
- Brother HL-L3270CDW
- Brother HL-L2370DW
- Brother HL-L6200DW
- Brother MFC-L2750DW
- Brother HL-L3280CDW
Related Brother Error Codes
If you are troubleshooting error Toner Low, these related error codes may also be relevant:
- Replace Drum – Drum Unit End of Life
- Drum Error – Drum Unit Malfunction
- Toner Low – Toner Cartridge Low
- Machine Error 46 – Unable to Print – Waste Toner
- Unable to Clean 46 – Purge Unit Error
Frequently Asked Questions
How many pages can I print after the Toner Low warning on Brother printers?
Brother printers often display the Toner Low warning well before the cartridge is empty. You can typically print 500-1000+ more pages depending on your coverage rate. Shake the cartridge to redistribute toner for even output.
How do I override the Toner Low message?
On most Brother models, go to the General Setup or Machine Info menu and look for a setting called ‘Toner Continue’ or similar. Enable this to allow printing even when toner is reported as empty. Note that print quality will degrade.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.