Fix Epson Error E-02: Paper Out Error
info Severity: info
If your Epson printer is displaying error E-02, do not worry – this is a known issue with a proven fix. This error typically indicates paper out error that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Epson Error E-02?
This error can be triggered by one or more of the following issues:
- Paper tray is empty
- Paper not detected by the feed sensor
- Paper guides not set correctly
- Paper feed roller not gripping
How to Fix Epson Error E-02
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Load paper into the rear or front paper tray
- Step 2: Ensure paper guides are adjusted to fit the paper
- Step 3: Fan the paper stack before loading
- Step 4: Clean paper feed rollers if paper is loaded but not detected
- Step 5: Press the Resume button to retry
Affected Epson Printer Models
The following Epson printer models are known to display error E-02:
Related Epson Error Codes
If you are troubleshooting error E-02, these related error codes may also be relevant:
- E-01 – General Printer Error
- W-12 – WiFi Connection Error
- E-10 – Ink Pad End of Life
- 000031 – Scanner Unit Open
- 0x97 – Internal Circuit Board Error
Frequently Asked Questions
What is Epson error E-02?
Error E-02 indicates the printer has run out of paper or cannot detect paper in the tray. Load paper and ensure it is properly positioned.
Why does my Epson EcoTank say no paper when paper is loaded?
The paper feed sensor or rollers may not be detecting the paper. Ensure paper is pushed firmly against the guides. Clean the rollers with the printer’s maintenance function if available.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.