Fix Epson Error W-01: Paper Jam
warning Severity: warning
If your Epson printer is displaying error W-01, do not worry – this is a known issue with a proven fix. This error typically indicates paper jam that can usually be resolved without a service call. Follow the steps below to clear this error.
What Causes Epson Error W-01?
This error can be triggered by one or more of the following issues:
- Paper jammed in the feed mechanism
- Multiple sheets fed simultaneously
- Paper too thick or damp
- Foreign object in the paper path
How to Fix Epson Error W-01
Follow these steps in order. After each step, check whether the error has cleared before proceeding to the next one.
- Step 1: Turn off the printer
- Step 2: Open the scanner unit and remove any visible jammed paper
- Step 3: Open the rear cover and remove paper from the back path
- Step 4: Check the ADF for paper jams if using the document feeder
- Step 5: Reload paper ensuring proper alignment
- Step 6: Power on and try printing again
Affected Epson Printer Models
The following Epson printer models are known to display error W-01:
Related Epson Error Codes
If you are troubleshooting error W-01, these related error codes may also be relevant:
- E-01 – General Printer Error
- W-12 – WiFi Connection Error
- E-10 – Ink Pad End of Life
- 000031 – Scanner Unit Open
- 0x97 – Internal Circuit Board Error
Frequently Asked Questions
What is Epson error W-01?
Error W-01 indicates a paper jam has been detected. Paper is stuck somewhere in the printer mechanism.
How do I clear a stubborn Epson paper jam?
Check all paper paths: front tray, rear cover, and ADF. Use a flashlight to look for small torn fragments. On some models, removing the rear cover completely gives better access to the paper path.
Error still not resolved?
If the steps above did not fix the error, the issue may require professional service. Contact the manufacturer support line or visit an authorized service center near you.